banners
beforecontenttitle

DEMANDAS TECNOLÓGICAS- BOLETINES CESEAND SECTOR: INDUSTRIAL TECHNOLOGIES

Después del título del contenido
Antes del cuerpo del contenido
Trozos html editables
Trozos html editables
  •  

    En esta sección podrá encontrar una selección de demandas tecnológicas existentes en empresas y centros de investigación en Europa, provenientes de los boletines CESEAND, nodo andaluz de la Enterprise Europe Network.

    Si necesita información adicional de alguna demanda en concreto o quisiera satisfacer alguna de estas, puede ponerse en contacto con la OTRI (otri@uma.es. Asunto: Demanda tecnológica Nº Ref.).

     

    New Technology for Improved Suspension and Handling of 8 mm Cubes in an aqueous solution (10 US 87GA 3J66)

    OTHER INDUSTRIAL TECHNOLOGIES,AGROFOOD INDUSTRY

    Abstract

    A large US company is looking for expertise in process improvement for suspending and handling 8x8x8 mm particulates in suspension in an aqueous solution. The objective is to distribute and maintain dispersion of suspended solids (such as pulp, fruit bits, etc.) in a slurry while preserving their physical attributes and avoiding damage to the particles. They are interested in proof of concept or component testing leading to licensing or component supply.

    Valid until: 17/12/2010


    Edible binder (10 BE 0213 3IZE)

    OTHER INDUSTRIAL TECHNOLOGIES,AGROFOOD INDUSTRY

    Abstract

    A multinational with presence in Belgium active in the consumer goods sector looks for an edible binder capable of firmly attaching dry particulate ingredients to another particle. The binder may be dispersed in a food liquid such as water or fat, but not in a solvent. The company is open to various types of agreements.

    Valid until: 19/10/2011


    Seeking Ultra Low Cost Metering Valve Design or Technologies (10 US 87GA 3J4J)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A large US company is looking for novel metering valve designs and/or technologies that can lead to the development of an ultra low cost metering valve suitable for the delivery of inhaled pharmaceuticals. They are interested in technology licensing, and/or contract development.

    Valid until: 17/12/2010


    Drag Reducing Surface Treatments (10 US 87GA 3J7E)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A large US company is looking for proposals for advanced technologies for the reduction of drag on surfaces immersed in moving liquids or gases. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development agreement.

    Valid until: 17/12/2010


    Innovative Techniques to Separate Water from Reactive Mixtures (10 US 87GA 3J3T)

    OTHER INDUSTRIAL TECHNOLOGIES,PHYSICAL AND EXACT SCIENCES

    Abstract

    A large US company is looking for proposals for innovative techniques to separate water vapour from highly reactive intermediates. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development and supplier agreement.

    Valid until: 17/12/2010


    Novel or innovative traffic management solutions (10 IE 51S6 3J29)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES

    Abstract

    An Irish company who specialises in all aspects of roadworks traffic management from design to implementation is seeking novel or innovative technologies, inventions or systems to enhance its effectiveness in this specialist market.

    The company is currently involved in new product development in relation to a pedestrian access and safety product. They would be interested in expanding this activity and view collaboration with other companies as a possible route to achieve this objective.

    Valid until: 19/10/2011


    Windows manufacturing techniques for innovative solution, ecobuilding oriented (10 IT 53V2 3J9I)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A small Italian company active in the field of windows manufactures search new manufacturing techniques (profiles, materials) and know-how for making windows. Partners are sought for a technical cooperation or commercial agreement with technical assistance.

    Valid until: 10/11/2011


    Technology and equipment for bag-in-box production (10 SE 67CG 3IGO)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A SME from Northern Sweden that is producing superior quality bottled water is looking for a partner that can provide technology for building a line for bag-in-box production.

    Valid until: 01/09/2011


    New Technologies for Prismatic Micropatterned Optical Structures (10 US 87GA 3J3P)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES

    Abstract

    A large US company is looking for proposals for innovative technologies for creating microprismatic structures for retroreflective applications. The goal is to identify new processing techniques or materials that can enable micro-patterned techniques, be demonstrated, and be scaled-up to production within 1-3 years. Speed and cost improvement over existing technologies is of prime interest. They are interested in new partnerships anticipated for funded application development, joint development.

    Valid until: 17/12/2010


    Perfect Surfaces via Controllable Reworking of Drying Coatings (10 US 87GA 3J3Q)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES

    Abstract

    A large US company is looking for proposals for technologies that make it possible to perfect the finish of surface coatings during drying. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development agreement.

    Valid until: 17/12/2010


    Hydrophilic To Hydrophobic Transitions (10 US 87GA 3J4H)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES

    Abstract

    A large US company is looking for proposals for technologies that can deliver hydrophilic to hydrophobic transformations in surface coatings. The technology is required to aid the delivery of hydrophilic materials into surface coating environments that ultimately need significant hydrophobic functionality. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development agreement.

    Valid until: 17/12/2010


    New Routes to Dialkyl Ketenes (10 US 87GA 3J3N)

    OTHER INDUSTRIAL TECHNOLOGIES,PHYSICAL AND EXACT SCIENCES

    Abstract

    A large US company is looking for proposals for novel synthetic routes to dialkyl ketenes. They are interested in licensing, contract research, proof of concept leading to scale up to manufacturing, joint development.

    Valid until: 17/12/2010


    Laboratory device for measuring the flow rate of thermoplastics (10 SK 69CU 3J1K)

    OTHER INDUSTRIAL TECHNOLOGIES,MEASUREMENTS AND STANDARDS

    Abstract

    A Slovak SME active in the field of recycling of technological waste plastic materials is looking for specialized laboratory device for measuring the flow rate of thermoplastics. The cooperation should be based on the license agreement with technological assistance.

    Valid until: 24/10/2011


    Request for a safe microencapsulation technology (10 FR 32j2 3J38)

    OTHER INDUSTRIAL TECHNOLOGIES,BIOLOGICAL SCIENCES

    Abstract

    A French SME is looking for a microencapsulation technology of oil as core product by a safe shell product. The technology must not be toxic and able to fit the requirements of cosmetics directive. The SME is interested in a technology transfer (licence agreement, know-how transfer) or in collaboration for ending development and scale-up.

    Valid until: 28/02/2011


    Method for shrink wrapping process of a product into a plastic film (10 IT 54V8 3J8Y)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    An Italian SME is looking for an alternative method to reduce the shrink wrapping process of the film around the product and the power consumption, achieving anyway the same speed and rapidity of the process. The company is interested in technical cooperation with SMEs and university research laboratories, in manufacturing and commercial agreement for assessment and further development of the shrinking process of the film.

    Valid until: 09/11/2011


    Pelletizing technology to produce biofuel and/or animal feed pellets (10 SE 672E 3JD7)

    OTHER INDUSTRIAL TECHNOLOGIES,ENERGY

    Abstract

    A Swedish company is looking for a pelletizing technology to produce biofuel from plant fibre and/or animal feed from plant protein. Ideally the technology should be flexible to manage both material streams in batch sequence with a daily capacity of 1½ tons per hour. The technology should be fully developed although adaptations or modifications may be necessary. The company is looking for a license, equipment with technical support or a partner with a suitable technology for joint exploration.

    Valid until: 31/12/2010


    New Methods for Biofilm Control (10 US 87GA 3JD4)

    BIOLOGICAL SCIENCES,AGROFOOD INDUSTRY

    Abstract

    A large US company is looking for processes or active ingredients that inhibit biofilm formation and promote biofilm degradation or removal in water treatment and food industries. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development, supplier agreement.

    Valid until: 24/12/2010


    Biodegradable Sachets Containing Liquid Consumer Products (10 US 87GA 3JD6)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A large US company is looking for proposals for a technology to produce fully biodegradable sachets that can contain liquid aqueous consumer products at the needed shelf life. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development and supplier agreement.

    Valid until: 22/12/2010


    Filterless Separation of Liquids from Organic Matter (10 US 87GA 3JEO)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A large US company is looking for proposals for separating liquids from vegetal pulp without the use of a filter. They are interested in licensing, product acquisition, contract research proof of concept leading to scale up to manufacturing, joint development and supplier agreement.

    Valid until: 22/12/2010


    Miniature Rotational Amplitude Sensor (10 US 87GA 3JC2)

    PHYSICAL AND EXACT SCIENCES,BIOLOGICAL SCIENCES

    Abstract

    A large US company is looking for a miniature rotational measurement system capable of measuring rotational velocities of at least 10,000 degrees/sec with rotational (pk-pk) amplitude of 6 to 18 degrees. They are interested in license or supply of technology / product.

    Valid until: 17/12/2010


    Looking for an innovative technology for storing and management of electrical energy (10 BG 0531 3J34)

    ENERGY

    Abstract

    A Bulgarian company specialized in the production of electrical energy from renewable energy sources is looking for an innovative technology for large-scale storing of electricity. The requested technology should be practical and cost-effective, thus providing flexible management of the electricity produced. The technology requested can either be at the development stage or fully developed.

    Valid until: 25/10/2011


    High Pressure, High Temperature (HPHT) issues in oil & gas production (10 GB 46P4 3JF0)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES, 

    Abstract

    Scottish SME seeks technology proposals for High Pressure, High Temperature issues in oil & gas production. 100% industry funding available for R&D and/or field trial of new technologies in the following areas: a) alloy steel alternatives (liners/coatings) b) permanent downhole monitoring systems c) reliable downhole chemical injection d) well life extension re depletion-driven compaction e) elastomer technology alternatives e) MWD/LWD sensor electronics reliability f) drill steering capability.

    Valid until: 22/11/2011


    Methods for the production of biogas or methane enrichment of biogas (10 DE 18A5 3IQ8)

    ENERGY

    Abstract

    A German plant manufacturer develops components of biogas plants. The company is particularly interested in enterprises and research facilities that are developing biogas methods and have special methods. The plan is the modular design of the plants and customized power adjustments.

    Valid until: 27/09/2011


    Liquid oligomeric or polymeric systems that cure to durable solid coatings (10 US 87GA 3JCM)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A large US company is looking for proposals for solvent free polymeric systems that cure to durable solids at room temperature on exposure to a triggering agent. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development agreement.

    Valid until: 22/12/2010


    Process technology to come to a purity of 99,999% of Yttrium from 99,9% pure (10 NL 60AF 3JA1)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A Dutch SME is looking for an economic method to purify an yttrium salt (carbonate, oxalate), already upgraded to a purity of around 99% up to 99.999%. There are no preconceived ideas of how to do this. The only requirement is that the method should be feasible on industrial scale (hundreds of tons/year). Partners are sought with experience in material recycling and separation technologies of a rare earth element like Yttrium.

    Valid until: 10/11/2011


    Bio-sourced and biodegradable packaging for cosmetics for the production of airless bottles and refill pouches (10 FR 38m6 3JEF) 

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES,

    Abstract

    A French SME is looking for a bio-sourced and biodegradable packaging for cosmetics technology. This company is willing to build a partnership with experts in transformation of biomaterials into plastics to develop and produce packaging (airless bottles and refill pouches) for cosmetic products. The requested technology can either be at the laboratory stage or fully developed.

    Valid until: 19/11/2011


    Coating technology for uniform phosphor (10 KR 9A9D 3JDT)

    ELECTRONICS, IT AND TELECOMMS,INDUSTRIAL MANUFACTURING,

    Abstract

    As a semiconductor package manufacturer, a Korean company has started new items related to LED (Light Emitting Diode) applications. They are especially interested in coating technology that can form uniform phosphor for white LEDs. They are looking for a commercial agreement with technical assistance and transfer of knowledge in new raw materials.

    Valid until: 18/11/2011


    Seeking technology of burning gases (10 PL 61AL 3J12)

    INDUSTRIAL MANUFACTURING, MATERIAL AND TRANSPORT TECHNOLOGIES

    Abstract

    A Polish company is seeking an innovative technology of burning gases from digestion of municipal waste. The technology should be focused on design and manufacture of a filter, innovatively smaller in size than currently used ones. The company is looking for various types of cooperation, including license agreement.

    Valid until: 25/10/2011

    Mon, 13 Dec 2010 10:42:35 GMT
Después del cuerpo del contenido